3D configurator
Request a quote+33 4 74 03 67 69
Floriane DumontTechnical sales representative📞 +33 7 50 74 07 16floriane.dumont [at] ebs-emballage.com
Switchboard: +33 4 74 03 67 69
FREN
3D configurator
Enter your dimensions, choose 2-way or 4-way entry, and watch your custom wooden pallet being built before your eyes. When you are happy with it, send it: our design office takes it over and prices it for you.
The pallet configurator offers the standardised formats — 1200 × 800 (Euro format), 1200 × 1000 (industrial format), 1000 × 1000 (square format) — and free dimensions: you set the length and the width; up to 3.50 × 1.50 m, it falls within our robotised production.
You also choose the number of deck boards, an open-boarded or closed deck, the overhangs and the timber section from our range. Larger than 3.50 m? That is oversize & large format: describe it in your request.
A 2-way entry pallet rests on bearers: the forks take it from two sides. A 4-way entry pallet rests on blocks and bottom boards, or on a closed perimeter base: it can be taken from all four sides.
The configurator draws both, part by part, and shows the dimensions, the height, the number of wooden parts and the estimated tare of your pallet.
Are your pallets leaving the European Union? Switch on the ISPM 15 treatment in the configurator: heat treatment of the wood and IPPC mark, mandatory for export outside the EU. EBS is approved for this treatment; our official number is FR-RH-02893 HT. See ISPM 15 export packaging.
The pallet configurator gives an indicative view: every case is specific, and our design office always validates the solution with you. Send your configuration from the full configurator, or request your quote directly.
Quotation within 24 hours on working days, except for specific products. For custom work, the time for a proper study: accuracy before speed.
Yes: it is a free tool. The study by our design office is free too, and without obligation.
The standardised formats (1200 × 800, 1200 × 1000, 1000 × 1000) or free dimensions up to 3.50 × 1.50 m, the maximum of our robotised production. For larger sizes, see oversize & large format.
A 2-way entry pallet rests on bearers and is taken from two sides. A 4-way entry pallet rests on blocks and bottom boards, or on a perimeter base, and is taken from all four sides.
No. It shows an indicative view and prepares your request. The price comes with your quote, within 24 hours on working days, except for specific products.
Yes: switch on the ISPM 15 treatment in the configurator. Heat treatment and the IPPC mark are mandatory outside the European Union.
Our design office checks it, optimises it and prices it for you. The study is free, and without obligation.